Monday, February 8, 2010

Tweaking RRM parameters

I wasn't aware that there were so many variables that could be adjusted for RRM.

Chapter 10 Configuring Radio Resource Management 
  • config {802.11a | 802.11b} channel global auto 
  • config {802.11a | 802.11b} channel global once 
  • config advanced {802.11a | 802.11b} channel {add | delete} channel_number 
  • config advanced {802.11a | 802.11b} channel dca sensitivity {low | medium | high} 
  • config advanced {802.11a | 802.11b} channel dca anchor-time hour 
  • config advanced {802.11a | 802.11b} channel dca interval value
Radio Resource Management under Unified Wireless Networks  

RRM Tuning (IUWMS module 1) - by Jerome Henry * CCO login required

RRM and the Ripple Effect - good response by Jerome Henry * CCO login required
at

2 comments:

  1. AnonymousFebruary 9, 2010 at 7:51 AM

    RRM can cause devastion to a large implementation if a proper site survey is not conducted. I had a trial by fire experience with this at a location that was hurricane proof, ie a very hard environment for RF.

    ReplyDelete
  2. JenniferFebruary 9, 2010 at 9:35 AM

    Oh, I don't recommend changing RRM parameters just for the heck of it, or without understanding the after effects of such changes - this type of adjustment via the CLI was something that I did not know how to do when I needed to most..

    ReplyDelete